Well, first before trying Karlsweldt’s idea, I should have mentioned that this was the driver i tried: Once the OS has written to the hdd, you no longer have to reply to the prompt to boot from the optical drive. So i downloaded them from somewhere, installed them and now the only place on my system where the hard drive is recognized is in the bios under ‘bootable devices’. It was a Seagate. I have been repairing computers since
|Date Added:||1 August 2007|
|File Size:||8.21 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
I am an apprentice trained Electronics Engineer with qualifications to back it up. And it ran fine. The only thing D845pebt22 could think of doing is upgrading the mobo bios. You should have to do this only once.
The Mother Board
Format all partitions at this time, so you do not have to do so later. Allow other boot paths to be chosen. Use the “C” partition to install your OS. Well, first before trying Karlsweldt’s idea, I should have mentioned that this was the driver i tried: You can reset the boot order after the OS has finally run “on its own” for the first time. It isn’t located anywhere in Windowsas far as i know.
And I did try to format the drive with the Windows cd, but not in that exact way. It was a Seagate. Free tech support, motherboard ID, and more. Create an extended partiton of the size that is adequate, or divide the drive into three equal partitions.
Disable the onboard if you want and install the drivers for the PCI card Once the OS has written to the hdd, you no longer have to reply to the prompt to boot from the optical drive. Why would my motherboard see the drive but not Windows? When the Intrl has pre-loaded into memory and requests a setup specification, choose a Gb partition size for the primary partition.
Afer a while, I finally got my mobo to recognize the hard drive in the intrl. The BIOS may recognize the hdd stats and present them, but may not understand them.
Don’t be concerned if the useful space for the setup is less than the total capacity. Board index All times are UTC. I have been repairing computers since It’s always funny until someone loses an Operating System!
Intel Desktop Board DPEBT2 – motherboard – ATX – Socket – iPE Overview – CNET
Yet to some people I still kntel nothing So i downloaded them from somewhere, installed them and now the only place on my system where the hard drive is recognized is in the bios under ‘bootable devices’. I didn’t make any partitions and just formatted the whole gb.
Anyway, thanks for helping if you could. The primary is an ATA drive. This is to be a d845pebg2 drive for storage. Also, i don’t know exactly where the driver would be in the device manager, but i searched and didn’t recognize it there. I have been programming on computers since the ZX The disk may be there but not activated yet.
Intec’s site shows a lot of upgrades since my version, but i’m just a trial and error idiot, inrel i’m guessing that’d be a mistake. Driver installation wasn’t on the cd menu and the floppy with the drivers would just say that the disc wasn’t formatted when i accessed it. The Mother Board Motherboards.
It warned me about gb possibly being the max or something but at that point i just didn’t know and did it.