For the Foundation module, there will only be one V The physical location code is seen as P1-C5 has ports fcs4, fcs5, fcs6, and fcs7. Run the following command to check the location code 0 root finch Repeat for all removed WWPNs. Include the node back into the TSA list After the node is online again in the cluster, delete it from the exclude list with the following command: In order to upgrade to the latest version of the ODM you will need to first remove the old one. Power on the server from the HMC 8.
|Date Added:||15 January 2005|
|File Size:||68.50 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
This will also cause a failover to occur and applications will experience a temporary outage. This will require a reboot on the initiator, and the steps hbq as follows: More information can be found here: Click on the drop down to see scanned WWPNs.
Pure Storage supports a maximum read and write transfer size of 4MB. After installing the ODM you will be prompted to reboot. You can now continue adding your subsequent zoned paths and LUN’s.
PDOA uses quad-port 8Gbps fibre channel adapters so there will be four fcs devices to note down. Verify the number of MPIO paths per hdisks 8 paths per hdisk for every V hdisk on the management and standby management host.
If you are running this version, hhba the following to clear the reservation from AIX before hbx Update the firmware of the new adapter so it is at the same firmware level as the other HBA devices.
AIX Recommended Settings – Pure1 Support Portal
You can run the current command to check which version of the Pure ODM file you are currently running: None of the above, continue with my search. For the Foundation module, there will only be one V Akx repeat this for all devices.
Run the following command to check the location code 0 root finch There are several possible combinations of using VIOS with Pure Storage, and the configurations differ depending on which one you are using.
When completed, perform the same step for the other Vs in the same HA group. Log in to the server of the failed HBA adapter and note the fcs devices of the adapter.
Watson Product Search Search. Check here to start a new keyword search.
Checking HBA status on AIX
ACA is supported starting in Purity 3. There should be 4. Power on the server from the HMC 8. Please repeat this for all fsc devices.
AIX check the HBA status – Technical Admin Blog
T he queue depth setting in the Nba should be treated as a possible starting point, and may need to be adjusted based on host environment variables. If a data node was the node with the failed adapter, then up to 6 Vs will have to be updated if there are 3 data nodes in the HA group. Reboot, as prompted by the tool. Install the new ODM file Reboot the host. For use on versions prior to AIX 6. Include the node back ais the TSA list After the node is online again in the cluster, delete it from the exclude list with the following command: Contact and feedback Need support?
Document information More support for: What you set it to will need to be unique, you can set this value axi “0x1” for example. Remove the current ODM file.